Technology
AL3D-345R Aluminum Enclosure Model
Pocket and Slot machining was completed in under 6 minutes, achieving a dimensional Accuracy within 0.05mm!
A versatile lineup of tools was utilized for drilling, threading, and chamfering operations.
Work material: A7075
Work size: 100×200×30mm
Max machining depth: 15mm
Coolant: Water soluble fluid
Machining time: 7min 56sec
└Pocket ・ Slot : 5min 39sec
└Thread ・Chamfer : 2min 17sec
Tool
AL3D-345R
●AL-series realized a stable and high efficient machining．
●It exhibits stable excellent surface on a wide area and no chattering occurs even during high speed cutting．
●Realized high efficiency machining by adopting 3-flutes．
MFD
●Small diameter drill with flat end profile，tool design developed and optimized for different sizes．
●Developed for the precise drilling field．Standardized every 0.05 sizes from Φ0.1～Φ0.95，and every 0.1 for over Φ1．
●Stable drilling is realized in various scenes such as inclined surface and curved surface！
●High efficient counter boring is available，also possible to reduce the back burr．
MMTM
●Improvement of cutting accuracy by adoption of tool design focusing on sharpness．
●MUGEN COATING realized long tool life．
●When the tool is broken during thread milling，the wreckages can be easily removed as the tool diameter is smaller than the pilot hole．
ALB225
●NS TOOL unique flute design reduces chattering at corner and side milling．
Machining Condition
Result
