DHS340FNEW
3-Flute Square End Mill with Nick for Copper Electrode



●Adopt nick shape (fine pitch type) on peripheral cutting edge to suppress cutting load.
●Chips can be removed smoothly by breaking up the chips smaller that preventing chipping and tool breakage.
●Strong helix angle and special nick shape are suitable for roughing.
Material
Micro Grain CarbideNumber of Flutes
3 FlutesHelix Angle
40°φd-0.001/-0.003
Applications
Side MillingApplications
Slot MillingApplications
Face Milling
Work Materials
Machinable indication by
,
Carbon Steel | Alloy Steel | Prehardened Steel | Hardened Steel | Stainless Steel | Heat Resistant Alloy | Aluminum Alloy | Copper | Resin | Graphite | Hard Brittle Material | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
~ 52HRC |
~ 60HRC |
~ 65HRC |
~ 70HRC |
||||||||||
Carbon Steel | Heat Resistant Alloy |
|||
---|---|---|---|---|
Alloy Steel | Aluminum Alloy | |||
Prehardened Steel |
Copper | |||
Hardened Steel |
~ 52HRC |
Resin | ||
~ 60HRC |
Graphite | |||
~ 65HRC |
Hard Brittle Material |
|||
~ 70HRC |
Hard Brittle Material |
|||
Stainless Steel |