MSXH440R
MUGEN COATING PREMIUM Power Radius End Mill



●Improved designs of unequal helix angle and flute spacing. Suppression from chattering to realize stable milling progression.
●Original spiral design at corner radius flutes improves cutting edge performance!
●Designed for high rigidity to suppress corner radius flute breakage even on rough milling stresses.
●Adopted MUGEN COATING PREMIUM for improvement heat resistance and cutting edge strength to protect from milling heat influence.
Coating
MUGEN COATING PREMIUMMaterial
Micro Grain CarbideCutting Possibility of Work Material Hardness
Up to 40HRCNumber of Flutes
4 FlutesHelix Angle
40°/42°Applications
Side MillingApplications
Slot MillingApplications
Face Milling
Work Materials
Machinable indication by
,
Carbon Steel | Alloy Steel | Prehardened Steel | Stainless Steel | Aluminum Alloy | Copper | Resin | Graphite | Hard Brittle Material | Heat Resistant Alloy | Hardened Steel | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
〜 55HRC |
~ 65HRC |
~ 70HRC |
||||||||||
Carbon Steel | Alloy Steel | |||
---|---|---|---|---|
Prehardened Steel |
Stainless Steel | |||
Aluminum Alloy | Copper | |||
Resin | Graphite | |||
Hard Brittle Material | Heat Resistant Alloy |
|||
Hardened Steel |
~ 55HRC |
~ 65HRC |
||
~ 70HRC |