SSE600

CBN Square End Mill

●Possible to machine the corner edge of hardened steels.
●Intensified wear resistance by NS TOOL original design of cutting edge.

  • Material
    CubicBoron Nitride

  • Cutting Possibility of Work Material Hardness
    Up to 70HRC

  • Number of Flutes
    6 Flutes

  • Helix Angle

  • φd h4

  • Applications
    Slot Milling

  • Applications
    Face Milling

Description of icons

Work Materials

Machinable indication by ,
Carbon Steel Alloy Steel Prehardened Steel Hardened Steel Stainless Steel Heat Resistant Alloy Aluminum Alloy Copper Resin Graphite Hard Brittle Material

55HRC

65HRC

70HRC

Carbon Stee Heat Resistant
Alloy
Alloy Steel Aluminum Alloy
Prehardened
Steel
Copper
Hardened
Steel

55HRC
Resin

65HRC
Graphite

70HRC
Hard Brittle
Material
Stainless Steel

Leaflet

Line up

Unit [size: mm]

Code
No.
(D)Dia. (l1)Under Neck Length (l)Length of Cut (d2)Neck Dia. (γ)Neck Taper Angle (d)Shank Dia. (L)Overall Length
01-00450-02004 0.2 0.4 0.08 0.175 15° 4 53
01-00450-02010 0.2 1 0.08 0.175 15° 4 53
01-00450-03005 0.3 0.5 0.12 0.275 15° 4 49
01-00450-03015 0.3 1.5 0.12 0.275 15° 4 50
01-00450-04008 0.4 0.8 0.16 0.37 15° 4 49
01-00450-04020 0.4 2 0.16 0.37 15° 4 50
01-00450-05010 0.5 1 0.2 0.46 15° 4 49
01-00450-05025 0.5 2.5 0.2 0.46 15° 4 50
01-00450-06012 0.6 1.2 0.24 0.56 15° 4 49
01-00450-06030 0.6 3 0.24 0.56 15° 4 50
01-00450-08015 0.8 1.5 0.32 0.76 15° 4 49
01-00450-08040 0.8 4 0.32 0.76 15° 4 52
01-00450-10020 1 2 0.4 0.95 15° 4 49
01-00450-10050 1 5 0.4 0.95 15° 4 52