5 ⾼硬度鋼 Hardened Steels H プリハードン鋼 Prehardened Steels P ■ 2枚刃ボールエンドミルとの切りくず排出量比較 Comparison of chip removal volume with 2-flute ball end mill 被削材 Work Material 高硬度鋼 Hardened Steels SKD11・PD613(〜62HRC) 2枚刃ボールエンドミルとの 切りくず排出量比較 Comparison of chip removal volume with 2-flute ball end mill 外径 Dia. 底刃 半径 End Tooth Bottom Radius 首下長 Under Neck Length 回転数 Spindle Speed 送り速度 Feed 切込み量 Depth of Cut 切りくず排出量 Material removal rate min-1 mm/min ap mm ae mm mm3/min 1 1 3 21,000 2,400 0.1 0.28 67.2 1.7倍 (1.7 times higher) 2 2 6 12,000 2,400 0.2 0.5 240 2.0倍 (2.0 times higher) 3 3 9 10,000 3,000 0.2 0.85 510 3.2倍 (3.2 times higher) 4 4 12 9,000 3,000 0.2 1.2 720 1.8倍 (1.8 times higher) 5 5 15 8,200 3,000 0.2 1.6 960 1.6倍 (1.6 times higher) 6 6 20 7,000 3,000 0.3 1.8 1,620 1.8倍 (1.8 times higher) 6 8 20 6,500 3,000 0.3 2 1,800 2.0倍 (2.0 times higher) 被削材 Work Material 高硬度鋼 Hardened Steels SKD11・PD613(〜62HRC) Rサイズ Radius 首下長 Under Neck Length 回転数 Spindle Speed 送り速度 Feed 切込み量 Depth of Cut 切りくず排出量 Material removal rate min-1 mm/min ap mm ae mm mm3/min R0.5 3 30,000 2,000 0.1 0.2 40 R1 6 25,000 2,000 0.2 0.3 120 R1.5 10 18,000 2,000 0.2 0.4 160 R2 12 16,000 2,500 0.2 0.8 400 R2.5 15 12,000 2,500 0.2 1.2 600 R3 20 8,000 2,500 0.3 1.2 900 2枚刃ボールエンドミル 2-flute ball end mill MLFH330 (3枚刃 3-flute) MLFH330はピックフィードを大きく設定でき、また3枚刃の効果で加工能率アップ! The MLFH330 enables for a large pick feed and the 3-flutes improve machining efficiency! 使用工具 Tool MLFH330 (3枚刃 3-flute) 2 枚刃ボールエンドミル 2-flute ball end mill 使用サイズ Tool size φ6×R8 × 20 R3 × 20 使用本数 [本] Tool Q’ty [pcs] 1 2 工具費用 Tool cost ¥11,000 (¥11,000/pc) ¥14,400 (¥7,200/pc) 加工時間 [分] Machining time [min] 275 600 機械チャージ代※ Machine charge fee※ ¥22,900 ¥50,000 加工コスト Machining cost ¥33,900 ¥64,400 ※機械チャージ代:¥5,000/時間で計算 ※Machine charge fee: JPY 5,000/hr 2枚刃との比較で 47% コストダウン 47% cost reduction compare with 2-flute ball end mills ECO ◆ コスト比較 Cost comparison 加工能率向上による機械稼働時間の短縮と、 工具の使用本数削減で、コストダウンに大きく貢献します Improvements in machining efficiency help significantly reduce costs by shortening machine operating time and reducing the number of tools used 加工能率比較と同じポケット形状を 5 つ加工した場合の加工コストを比較しました Comparison of cost for five pockets of the same shape and machining efficiency
RkJQdWJsaXNoZXIy NDY3NTA=