3 2-2 ピックフィードを大きく取ることによる 切りくずの大きさに対し十分なチップポケットで 切りくず詰まりや噛み込みによる突発的な チッピングを防止します Large enough chip pockets prevent unexpected chipping of cutting edge or chip jamming due to the size of the chips by large pick feed ■2枚刃ボールエンドミルとの加工能率比較 (φ1・R0.5) Comparison of machining efficiency with 2-flute ball end mill 被削材 : STAVAX (52HRC) Work material クーラント : オイルミスト Coolant : Oil mist 加工サイズ : 14.5 × 30.8 × 3 mm Machining size 加工工程 Process MLFH330 (3枚刃 3-flute) 2 枚刃ボールエンドミル 2-flute ball end mill 使用サイズ Tool size φ1×R1 × 3 R0.5 × 3 回転数 [min-1] Spindle speed 27,500 40,000 送り速度 [mm/min] Feed 3,750 2,500 切込み量 ap × ae [mm] Depth of cut 0.1 × 0.425 0.1 × 0.3 一刃送り [mm/tooth] Feed per tooth 0.045 0.031 1ポケット加工時間 Machining time/pocket 15 分 15 min 25 分 25 min 加工時間 40%減! Machining time reduced by 40% ポケット加工数と逃げ面摩耗幅比較 Comparison between machined pocket quantity and flank wear width ポケット加工数[個] Quantity of machined pockets (pocket) 逃げ面摩耗幅[mm] Flank wear width 2 枚刃ボールエンドミル 2-flute ball end mill MLFH330 ⾼硬度鋼 Hardened Steels H プリハードン鋼 Prehardened Steels P 加工個数 40%増! Machined quantity 40% increased! 切りくず Chip 大きなチップポケット Roomy chip pocket 高能率でありながら、 加工時間短縮による寿命の向上で、 生産性とコストの両立を実現します Achieves high efficiency with both productivity and cost performance through shortening machining time and increasing tool life
RkJQdWJsaXNoZXIy NDY3NTA=