 |
Announcement of Head Office Relocation
|
|
We are pleased to announce that NS TOOL CO., LTD. reloates HEADQUARTERS / TOKYO OFFICE, and transfers its operation by following schedule. Please note new contact numbers of the relocated departments, and location map for the former and new headquarters. We are looking forward to seeing you at our office soon, and appreciate for your pleasant cooperration.
For the detail, please see here.
(2008.6) |
|
 |
|
New General Catalogue |
|
General Catalogue Vol.12 issued!
For the details, please contact your local dealer/distributor.
(2008.4)
|
|
|
|
CBN Ball End Mill for precision machining “CBN Micro Ball”
The world's first CBN Micro Ball End Mill.
CBN Micro Ball develops new machining capability in high-precision technology. |
|
SMB120 New Product
Standardized sizes from R0.01.
Realized sharp edge by maximizing features of CBN.
Long machining on pre-hardened to high-hardened steels(60HRC~).
(2008.4) |
|
|
|
Ball End Mill for precision machining “Micro Ball”
The world's first standardization of Ball size R0.005. Micro Ball develops new machining fiedld in high-precision technology |
|
NSMB100 New Product
The world's smallest ball end mill “Micro Ball” extends precision machining field.
NS original R design exercises fine finishing surface.
(2008.4) |
|
|
|
MICRO DRILL SERIES
Standarized from dia. 0.01mm by concentrating NS manufacturing technology!
Super precision Micro Drill develops new drillng capability. |
|
NSMD-M New Product
NSMD
NSMD-MS New Product
NSMD-S New Product
NSPD-M New Product
NSPD
New! MUGEN MICRO COATING
Special development of the thin film coating for Micro Drill.Smooth and uniform thickness without extraneous substances on the coating surface exercise high drilling performance on steels include stainless steels.
Thinning on the cutting edge to reduce cutting forces for accurate drilling (NSMD Type Dia. 0.02~, NSPD Type Dia. 0.025)
Also Aveailable Micro Point Drill for guide hole
(2008.4) |
|
|
|
2-Flute Long Neck Radius End Mill for Hardened Steel
4-Flute Long Neck Radius End Mill for Hardened Steel |
|
MHRH230R New Product
MHRH430R New Product
Adoption of Mugen Coating Premium for Hardened Steel
Minimized chattering in side milling
Adoption of back taper shape on the peripheral cutting edge
Enable higher efficient machining than Ball End Mills
High accurate corner R radius at +/-5µm(-D2.5)
(2008.4) |
|
|
|
CBN Super Surface End Mill
Super precision and accurate surface finishing with long tool life.
Equivalently fine finishing surface to grinding surface by milling. |
|
SSF120 New Product
Appropriate for datum plane machining on precision maching.
NS original design and corner R to realize stable maching surface.
(2007.10) |
|
|
|
Addtional size line up for Mugen Coating Premium Series
New Development |
|
MRBH230 Expansion of variety
MSBH230
Adoption of Mugen Coating Premium for Hardened Steel
Realized sharp performance and durability
Original R design for Hardened Steel
Minimized chattering in side milling
Adoption of back taper shape on the peripheral cutting edge
(2007.10) |
|
|
|
MICRO DRILL / MICRO POINT DRILL
Standarized from dia. 0.01mm by concentrating NS Manufacturing technology! |
|
NSMD New Product
NSPD New Product
Super precision Micro Drill develops new drilling capability
Thinning on the cutting edge to reduce cutting forces for accurate drilling(NSMD Dia. 0.02-, NSPD Dia. 0.025-)
Available Micro Point Drill for guide hole
(2007.7) |
|
|
|
Monocrystalline Diamond End Mill “CLEAR EDGE”
Ultimate tool material to advent of new era in high-precision machining
Birth of new end mill “CLEAR EDGE” to do the impossible! |
|
CED100 New Product
Direct machining to cemented carbide, hard metal
Enable high-accurate machining to brittle material
Unique design to maximize performance of monocrystalline diamond
(2007.7) |
|
|
|
MUGEN Coating Premium Series
New Development |
|
MSBH230 New Product
MSBH230
Adoption of Mugen Coating Premium for Hardened Steel
Realized sharp performance and durability
Original R design for Hardened Steel
Mnimized chattering in side milling
Adoption of back taper shape on the peripheral cutting edge
(2007.5) |
|
|
|
CBN Micro-Edge “Z”
Top of the “CBN” for super high precision |
|
SMEZ120 New Product
New arrival of CBN micro end mill to upgrade the world's smallest Micro-Edge end mill series.
Developed to enlarge super high precision machining field for variety of materials, pre-hardened to high-hardened steels, and for dramatic improvement of machining quality.
(2007.2) |
|
|
|
New General Catalogue |
|
General Catalogue Vol.11 issued!
For the details, please contact your local dealer/distributor.
(2006.11)
|
|
|
|
MUGEN-COATING “MX” Lead End Mill Series
Helix angle corresponds to length of cut |
|
MX225New Product
MX230New Product
MX235New Product
MX240New Product
MX245New Product
Lineup of 5 items, 206 sizes, applicable to all kinds of machining configuration and work material in the use of most appropriate tool size.
Avarable for optimum length of cut for the milling configuration.
Length of cut with appropriate helix angle reduces milling resistance.
Upgraded Mugen-coating is perfect for all kinds of work material.
(2006.11) |
|
|
|
MUGEN-COATING Long Neck Ball Hard
Upgraded Mugen-coating is perfect for a prolonged machining of pre-hardened to high-hardened steel up to 65HRC. |
|
MRBH230New Product
Unique new design excels in chipping prevention and resolves chattering to realiz excellent finished surface.
(2006.11) |
|
|
|
MUGEN-COATING Long 2-Flute Long Neck Ball Endmill with Short Shank
New Development of Long Neck Ball End Mill with short shank suited for shrink chuck. |
|
MRB230SFNew Product
Upgraded Mugen-coating is perfect for all kinds of work material.
Most appropriate for high-speed machining.
(2006.11) |
|
|
|
3-Flute Slim Shank End Mill for Aluminum
End Mill for Aluminum |
|
AL-3LSNew Product
Slimmed shank suits side milling.
Original flute design for advanced sharp edge and chip disposal enables highly stable machining without chatter.
Corner-R at flute end effects an accurate site step milling.
(2006.11) |
|
|
|
MUGEN-COATING BEST SELECTION |
|
Best selected 6 items from MUGEN-COATING End Mill Series
MSE230 / MSE430 / MHR230 / MHR430 / MSB230 / MRB230
Now available in the catalog series with a new price revision for more reasonability.
(2006.7) |
|
|
|
CBN Super Speed Long Neck Ball End Mill
Lineup of CBN tool with long neck applicable to deep milling, avalable 23 size in total. |
|
SSBL200New Product
Enables milling more deeply by long effective length up to 10mm comparing with conventional CBN tools.
Enables wider application for milling by long neck in addition to long tool life and accurate finishing.
Standardized in R0.05 at smallest.
Unique flute design with R-accuracy ±0.005 prevents chipping!
(2006.6) |
|
|
|
New General Catalogue |
|
General Catalogue Vol.10 issued!
For the details, please contact your local dealer/distributor.
(2006.4)
|
|
|
|
MUGEN-COATING Radius End Mill for Deep Rib with Long Neck
Expanded lineup in Radius End Mill with long neck. |
|
MHR230R Expansion of variety
MHR430RNew Product
Minimized chattering by peripheral cutting edge designed for minimal interference to work material.
Realized high efficiency milling by obtainning larger radial depth of cutting comparing with Ball End Mill.
Corner R accuracy:±5µm(2.5D and below)
Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel and Copper Electrode as well.
(2006.4) |
|
|
|
MUGEN-COATING Radius End Mill with Long Taper Neck
MUGEN-COTING Series with Long Taper Neck Radius End Mill. |
|
MSTNR230 New Product
Improve surface overall accuracy brought by high speed cutting with minimal chattering in roughing to finishing process.
High R-Accuracy:±5µ
Prevent interference to a work. Designed tapered neck with angle tolerance:-10′.
Better performance in wide range of machining of direct carving on Prehardened Steels and Copper Electrode.
(2006.3) |
|
|
|
CBN Super Speed Radius End Mill
Top of the “CBN” |
|
SSR200 New Product
Realized high efficient machining with radius flute along with excellent wear resistance of CBN.
Realized excellent surface roughness by introducing smooth tangent on all over flute.
(corner accuracy :±5µm)
Applicable for work matetials from tempered steel to hardened steel (up to 70HRC).
(2005.10) |
|
|
|
MUGEN-COATING "Profit Ball" End Mill
Profit Revolution |
|
MSB230G2 New Product
Utmost accuracy! T-tolerance : ±2µm
Power-up Mugen Coating guarantees outstanding performance for the machining of Pre-hardened Steel and Copper Electrode as well.
(2005.4) |
|
|
|
CBN Ball End Mill
Top of the "CBN" |
|
SSB200 New Product
This CBN Ball End Mill has realized both advantages of CBN and Carbide. Depth of Cut can be increased at the equivalent level to Carbide. Unique flute design with R-accuracy ±0.005 prevents chipping! Flute is smoothly tangent from straight line to R-curve. Applicable for hardest materials at 70HRC.
SFB200
Sharpened edge at R-center improves shearing ability.
Long-lasting high surface accuracy Ry1.5µm.
(2005.4) |
|
|
|
MUGEN-COATING 2-Flute Ball End Mill
A pioneer of Long Neck Ball End Mill! |
|
MRB230 Expansion of variety
Power-up Mugen Coating guarantees outsiding performence for the machining of Pre-hardened Steel and Copper Electrode as well.
(2005.4) |
|
|
|
MUGEN-COATING End Mill for Deep Rib with Long Neck
A pioneer of Long Neck End Mill! |
|
MHR230 Expansion of variety
MHR430
MUGEN-COTING has been put on our original end mill for deep rib. It is very suitable for cutting on narrow and deep rib by long neck end mill.
(2005.4) |
|
|
|
Micro End Mill "MICRO EDGE"
"Micro Edge" touches the future technology |
|
NSME100 New Product
NSME230 New Product
Sharp edge in nanoland is realized. Ultra-high-precision accuracy:Tolerance of flute diameter is ±2µm Tolerance of shank diameter is h3(from 0 to -0.0025) 12 items from 0.01 to 0.09mm diameter.
(2005.2) |
|
|
|
End Mill for Resin
|
|
RSB230 New product
RSE230
Select the right one for your job, 5D or 10D Length of cut, With Extra Long-neck or without neck Applicable to nonferrous material such as Aluminum and copper.
(2004.11) |
|
|
|
End Mill for Aluminum
AL-series realized a stable and high efficient machining. |
|
ALZ345New product
Unique flute design permits smooth chip disposal.
AL2D-2New product
Regular type with 2D Length of cut promiss the best cost performance by heavier and efficient machining.
AL3D-2Expansion of variety
AL5D-2Expansion of variety
It exhibits stable excellent surface on a wide area and no chattering occurs even during high speed cutting.
AL3D-2DLCExpansion of variety
Our original DLC coating are adopted, it is suitable for cutting for long time.
(2004.8) |
|
|
*If you cannot view pamphlets, you should download a copy of the Adobe Acrobat Reader and install it. The Adobe Acrobat Reader can be downloaded from the Adobe web site. |
