•Radius end mill with Mugen Coating Premium for high-hardened steel.
[MHDH645R]
[6-Flute Radius End Mill for Hardened Steel]
• Radius end mill with Mugen Coating Premium for high-hardened steel.
[MHR230R]
[MUGEN-COATING Radius End Mill for Deep Rib with Long Neck]
•Minimized chattering by peripheral cutting edge for minimal interference to work material.
•Realized high efficiency milling by obtaining larger radial depth of cutting comparing with Ball End Mill.
•Corner R accuracy:±5µm(2.5D and below)
•Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel and Copper Electrode as well.
[MHR430R]
[MUGEN-COATING Radius End Mill for Deep Rib with Long Neck]
•Enhanced selectivity for machining process in all 146 sizes.
•Employing short flute length. Less interference to work material reduces chattering.
•Corner R accuracy :±5µm(2.5D and below)
•Upgraded Mugen-Coating brings outstanding performance for milling of Prehardened Steel and Copper Electrode as well.
[MHRH230R]
[2-Flute Long Neck Radius End Mill for Haedened Steel]
•Mugen Coating Premium for hardened steels and unique new design excel in chipping prevention and resolves chattering to realize excellent finished surface.
•Total 48 sizes.
[MHRH430R]
[4-Flute Long Neck Radius End Mill for Hardened Steel]
•Mugen Coating Premium for hardened steels and unique new design excel in chipping prevention and resolves chattering to realize excellent finished surface.
•4 flutes end mill for higher efficiency.
[MSRS230]
[MUGEN-COATING 2-Flute Radius End Mill]
• It is possible to cut both straight and corner radius simultaneously.
• It is very suitable for high speed cutting because the length of cut is short.
[MSRS430]
[MUGEN-COATING 4-Flute Radius End Mill]
• It is possible to cut both straight and corner radius simultaneously.
• It is very suitable for high speed cutting because the length of cut is short.
[MSTNR230]
[MUGEN-COATING Radius End Mill with Long Taper Neck]
•Improve surface overall accuracy brought by high speed cutting with minimal chattering in roughing to finishing process.
•High R-Accuracy:±5µm
•Prevent interderence toa work. Designed tapered neck with angle tolerance:-10′.
•Better performance in wide range of machining of direct carving on prehrdened Steels and Copper electrode.
[MSXH440R]
[Power Radius End Mill]
•Improved designs of unequal helix angle and flute spacing.
•Original spiral design at corner radius flutes improves cutting edge performance!
•Designed for high rigidity to suppress corner radius flute breakage even on rough milling stresses.
•Adopted MUGEN-COATING PREMIUM for improvement heat resistance and cutting edge strength to protect from milling heat influence.
[NSR-2]
[Semi-standard Item Solid Carbide 2-Flute Radius End Mill]
•It is possible to cut both straight and corner radius simultaneously.
[SSR200]
[CBN Super Speed Radius End Mill]
•Realized high efficient machining with radius flute along with excellent wear resistance of CBN.
•Realized excellent surface roughness by introducing sooth tangent on all over flute.(corner accuracy:±5µm)
• Applicable for work materials from tempered steel(up to 68 HRC).
• We recommend using oil mist coolant.
