[AL-3LS] [Solid Carbide 3-Flute Long Shank End Mill for Aluminum] •Slimmed shank suits milling. •Corner-C at flute end effects an accurate side step milling.

[AL2D-2] [Solid Carbide 2-Flute End Mill for Aluminum] •AL-series realized a stable and high efficient machining. •Regular type with 2D Length of cut promises the best cost performance for heavier and efficient machining.

[AL3D-2] [Solid Carbide 2-Flute End Mill for Aluminum] •It is developed for high efficiency cutting on Aluminum. •It exhibits stable excellent surface on a wide area and no chattering occurs during high speed cutting.

[AL3D-2DLC] [DLC-COATING 2-Flute End Mill for Aluminum] •AL-series realized a stable and high effient machining. •Our original DLC coating are adopted, it is suitable for cutting for long time.

[AL5D-2] [Solid Carbide 2-Flute Long End Mill for Aluminum] •AL-series realized a stable and high efficient machining. •It exhibits stable excellent surface on a wide area and no chattering occurs even during high speed cutting.

[ALZ345] [3-Flute Power “Z” End Mill for Aluminum] •AL-series realized a stable and high efficient machining. •Improved drilling capacity! •High performance, heavy machining with better chip disposal.

[CED100] [Monocrystalline Diamond End Mill “CLEAR EDGE”] •Direct machining to cemented carbide, hard metal •Enable high-accurate machining to brittle materials •Unique design to maximize performance of monocrystalline diamond

[DCHR230] [Diamond Coating 2-Flute Long Neck End Mill] •Original Diamond Coating realized a long tool life for the machining of Graphite, silicon-aluminum alloy and brittle materials. •Long neck design is suited for the machinig of narrow and deep area.

[DCMS] [End Mill for Hard Brittle Materials] •Machinable on hard brittle materials such as cemented carbide and ceramic. •High adhered diamond coating makes tool life long.

[DCSE235] [Diamond Coating 2-Flute End Mill] •Original Diamond Coating realized a long tool life for the machining of graphite, silicon-aluminum alloy and brittle materials. •Square design of L/D=3 is suited for the machinig of narrow and deep area.

[MHD445] [MUGEN-COATING 4-Flute End Mill for Hardened Steel] •It is possible to cut hardened materials of 60HRC and harder at high speed cutting. •It performs high precision finishing without the deflection.

[MHD645] [MUGEN-COATING 6-Flute End Mill for Hardened Steel] •It is possible to cut hardened materials of 60HRC and harder at high speed cutting. •It performs high precision finishing without the deflection.

[MHDH445] [4-Flute Square End Mill for Hardened Steel] •Stably long tool life on milling hardened steel

[MHDH645] [6-Flute Square End Mill for Hardened Steel] •Available L/D 2 and 3 •Selective for conformed tools

[MHR230] [MUGEN-COATING 2-Flute End Mill for Deep Rib with Long Neck] •MUGEN-COATING has been put on our original end mill for deep rib. •It is very suitable for cutting narrow and deep rib by long neck end mill.

[MHR430] [MUGEN-COATING 4-Flute End Mill for Deep Rib with Long Neck] •MUGEN-COATING has been put on our original end mill for deep rib. •It is very suitable for cutting narrow and deep rib by long neck end mill.

[MHRH230] [2-Flute Long Neck End Mill for Hardened Steel] • Mugen Coating Premium to improve accuracy and tool life on machining hardened steel! • Total 83 sizes!

[MHRH430] [4-Flute Long Neck End Mill for Hardened Steel] •Improve tool rigidity for precision machining! •Total 55 sizes!

[MHRLN230-6] [Semi-standard Item MUGEN-COATING 2-Flute End Mill for Deep Rib with Long Neck (Shank Dia. φ6)] •Semi-standard item. Please inquire for price and delivery.

[MSE230] [MUGEN-COATING 2-Flute End Mill] •Our original MUGEN-COATING has been put on 2-flute end mill. •It covers all-round cutting from roughing to finishing. •Marked *: Semi-standard item. Please inquire for price and delivery.

[MSE230M] [MUGEN-COATING 2-Flute End Mill with measured diameter] • Our original MUGEN-COATING has been put on 2-flute end mill. • Printed actual measurement of diameter in micron.

[MSE230SS] [Semi-standard Item MUGEN-COATING 2-Flute Super Short End Mill] •Semi-standard item. Please inquire for price and delivery.

[MSE245] [MUGEN-COATING 2-Flute End Mill] •Our original MUGEN-COATING has been put on 2-flute end mill. •Compared with 30°helix angle, it can be reduced cutting resistance.

[MSE345] [MUGEN-COATING 3-Flute End Mill] • Our original MUGEN-COATING has been put on 3-flute end mill. • Compared with 30°helix angle, it can be reduced cutting resistance.

[MSE430] [MUGEN-COATING 4-Flute End Mill] • Our original MUGEN-COATING has been put on 4-flute end mill. • It can be cut from non-hardened materials to hardened materials.

[MSE430P] [MUGEN-COATING 4-Flute Sharp Edge End Mill] • It is available for a wide range of cutting from nonferrous to steels due to the sharp edges. • Minimize tool deflection for accurate finishing.

[MSE445] [MUGEN-COATING 4-Flute End Mill] • Our original MUGEN-COATING has been put on 4-flute end mill. • Compared with 30°helix angle, it can be reduced cutting resistance.

[MSEM230] [MUGEN-COATING 2-Flute Medium End Mill] • The length of cut is four times dia.

[MSEM430] [MUGEN-COATING 4-Flute Medium End Mill] •It is very suitable for finishing side milling with the depth of four times the dia.

[MSES230P] [MUGEN-COATING 2-Flute Sharp Edge Short End Mill] • It is very suitable for high speed cutting due to the length of cut is short and rigid. • Sharp edge profile guarantees high shearing ability.

[MSX440] [MUGEN-COATING POWER End Mill] • It is very suitable for roughing and semi-finishing on stainless steel and tough materials by unequal flute design. • High performance for reducing roughing time.

[MSZ345] [MUGEN-COATING POWER ¡ÈZ¡É End Mill] •New flute design brought a remarkable shearing ability. •High efficient machining is realized both for plunge cutting and slotting. •MUGEN-COATING prolongs the tool life than ever. •Marked *: Semi-standard item. Please inquire for price and delivery.

[MX225] [MUGEN-COATING LEAD25 End Mill] •Design of short length of cut and helix 25° to increase rigidity realizes high efficient machining, and minimizes deflection.

[MX230] [MUGEN-COATING LEAD20 End Mill] •Applicable to both slotting and side milling •The length of cut is double dia, and helix angle is 30°.

[MX235] [MUGEN-COATING LEAD35 End Mill] •Available for appropriate length of cut for the machining •The length of cut is three times dia. and helix angle 35°.

[MX240] [MUGEN-COATING LEAD40 End Mill] • MX240 with length of cut of 4 times the diameter is suitable for deep machining with minimum deflection of cutting up-right surface. • The length of cut is four times dia, and helix angle is 40°.

[MX245] [MUGEN-COATING LEAD45 End Mill] • MX245 with length of cut of 5 times the diameter is suitable for deep machining with minimum deflection of cutting up-right surface.

[MX425] [MUGEN-COATING 4-Flute LEAD25 End Mill] •Design of short length of cut and helix 25° to increase rigidity realizes high efficient machining, and resolves chattering and minimizes deflection.

[MX430] [MUGEN-COATING 4-Flute LEAD30 End Mill] •Applicable to any milling process •The length of cut is double dia, and helix angle is 30°.

[MX435] [MUGEN-COATING 4-Flute LEAD35 End Mill] •Available for appropriate length of cut for the machining •The length of cut is three times dia, and helix angle is 35°.

[MX440] [MUGEN-COATING 4-Flute LEAD40 End Mill] • MX440 with length of cut of 4 times the diameter is suitable for deep machining with minimum deflection of cutting up-right surface.

[MX445] [MUGEN-COATING 4-Flute LEAD45 End Mill] • MX445 with length of cut of 5 times the diameter is suitable for deep machining with minimum deflection of cutting up-right suface.

[MXH225] [MUGEN-COATING PREMIUM 2-Flute LEAD25 End Mill] •Applicable for heat resistance alloy such as stainless steels and titanium alloy by MUGEN-COATING PREMIUM. •L/D=1 and helix 25° to increase rigidity and realize high efficient machining. •Suppress chattering and deflection in slotting process.

[MXH225P] [MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 25 End Mill] •Applicable for heat resistance alloy such as stainless steels and titanium alloy by MUGEN-COATING PREMIUM with sharp edge type •L/D=1 and helix 25¡ë

[MXH230] [MUGEN-COATING PREMIUM 2-Flute LEAD30 End Mill] •Applicable for heat resistance alloy such as stainless and titanium alloy by MUGEN-COATING PREMIUM •L/D and helix 30° standard type, applicable for both slotting and side milling

[MXH230P] [MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD30 End Mill] •Applicable for heat resistance alloy such as stainless steels and titanium alloy by MUGEN-COATING PREMIUM with sharp edge type •L/D=2 and helix 30¡ë

[MXH235] [MUGEN-COATING PREMIUM 2-Flute LEAD35 End Mill] •Applicable for heat resistance alloy such as stainless steels and titanium alloy by MUGEN-COATING PREMIUM •L/D=3 and helix 35° for appropriate length of cut to avoid the inconveniences in size selection

[MXH235P] [MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD35 End Mill] •Applicable for heat resitance alloy such as stainless steels and titanium alloy by MUGEN-COATING PREMIUM with sharp edge type. •L/D=3 and helix 35°.

[MXH240] [MUGEN-COATING PREMIUM 2-Flute LEAD40 End Mill] •Applicable for heat resistance alloy such as stainless steels and titanium alloy by MUGEN-COATING PREMIUM •L/D=4 and helix 40° is suitable for deep machining with minimum deflection of cutting up-right surface

[MXH245] [MUGEN-COATING PREMIUM 2-Flute LEAD45 End Mill] •Applicable for heat resistance alloy such as stainless steels and titanium alloy by MUGEN-COATING PREMIUM •L/D=5 and helix 45° to minimize the milling deflection even though the long cutting length design

[NC-2] [Semi-standard Item CHAMPION SOLID 2-Flute End Mill] •Semi-standard item. Please inquire for price and delivery.

[NC-4] [Semi-standard Item CHAMPION SOLID End Mill] •Semi-standard item. Please inquire for price and delivery.

[NC-LS-2] [Semi-standard Item CHAMPION SOLID Long Shank End Mill] •Semi-standard item. Please inquire for price and delivery.

[NCL-2] [Semi-standard Item CHAMPION SOLID 2-Flute Long End Mill] •Semi-standard item. Please inquire for price and delivery.

[NCL-4] [Semi-standard Item CHAMPION SOLID 4-Flute Long End Mill] •Semi-standard item. Please inquire for price and delivery.

[NCM-2] [Semi-standard Item CHAMPION SOLID 2-Flute Medium End Mill] •Semi-standard item. Please inquire for price and delivery.

[NCM-4] [Semi-standard Item CHAMPION SOLID 4-Flute Medium End Mill] •Semi-standard item. Please inquire for price and delivery.

[NE-2] [Semi-standard Item POWER SOLID End Mill] •Semi-standard item. Please inquire for price and delivery.

[NE-3] [Semi-standard Item POWER SOLID End Mill] •Semi-standard item. Please inquire for price and delivery.

[NE-4] [Semi-standard Item POWER SOLID End Mill] •Semi-standard item. Please inquire for price and delivery.

[NEA-2] [Semi-standard Item Solid Carbide 2-Flute End Mill for Aluminum] •It can be cut well with a wide chip pockets. •Manufactured in special selected carbide material, it is suitable for cutting aluminum, copper and nonferrous metals and extends tool life.

[NEL-3] [Semi-standard Item POWER SOLID Long End Mill] •Semi-standard item. Please inquire for price and delivery.

[NHR-2] [Solid Carbide 2-Flute End Mill for Deep Rib with Long Neck] • It is very suitable for cutting narrow and deep rid by long neck end mill.

[NHR-2X] [Semi-standard Item X-COATING 2-Flute End Mill for Deep Rib with Long Neck] •Semi-standard item. Please inquire for price and delivery.

[NSL-2] [Semi-standard Item Solid Carbide Straight End Mill for Reforming] •Semi-standard item. Please inquire for price and delivery.

[NSME100] [Micro End Mill “MICRO EDGE”] •Ultra-high-precision accuracy guaranteed with ±2µm tolerance of flute diameter and h3 tolerance of shank diameter. •One straight flute, 5 items from 0.01 to 0.05mm diameter.

[NSME230] [Micro End Mill “MICRO EDGE”] •Ultra-high-precision accuracy is guaranteed with ±2µm tolerance of flute diameter and h3 tolerance of shank diameter. •Two flutes in helix 30°. 7items from 0.03 to 0.09mm diameter.

[NSX-6] [Semi-standard Item KATABUTSU End Mill] •Semi-standard item. Please inquire for price and delivery.

[NX-25] [LEAD 25 End Mill] •It is possible to have high precision slotting because the length of cut is short and the helix angle is not sharp. •Marked *: Semi-standard item. Please inquire for price and delivery.

[NX-30] [LEAD 30 End Mill] •The length of cut is double diameter, it is for all-round cutting from roughing to finishing. •Marked *: Semi-standard item. Please inquire for price and delivery.

[NX-30X] [Semi-standard Item X-COATING 2-Flute End Mill] •Semi-standard item. Please inquire for price and delivery.

[NX-35] [LEAD 35 End Mill] •The length of cut is three times dia, and helix angle is 35°. •Cutting efficiency is higher than the regular helix angle. •Marked *: Semi-standard item. Please inquire for price and delivery.

[NX-40] [LEAD 40 End Mill] •The length of cut is four times dia, and helix angle is 40°. •Chips can be discharged easily with high helix angle. •Marked *: Semi-standard item. Please inquire for price and delivery.

[NX-45] [LEAD 45 End Mill] •Long length of cut type (five times dia.). •It can be cut deep side well. •Marked *: Semi-standard item. Please inquire for price and delivery.

[PCDSE] [Polycrystalline Diamond End Mill] •Fine and stable milling surface realized on cemented carbide material. •Possible to get the nano-level surface roughness required on ultra-high precision machining. •NS original flute design of cutting edge enabled a strong resistance against wear and chipping.

[RSE230] [End Mill for Resin] •Select the right one for your job, 3D or 5D or 10D Length of cut, with Extra Long-neck or without neck. •It can be used also for no-ferrous material such as Aluminum. •Total 135 size!

[RSES230] [Short Flute Type End Mill for Resin] •Applicable to nonferrous material such as Aluminum and copper. •Eliminate the conventional problem of the long flute length. •Marked *: Semi-standard item. Please inquire for price and delivery.

[SMEZ120] [CBN MICRO EDGE Z] •NS engineering technology and selected CBN material realize sharp edge. •Tolerance of flute diameter is ±2µm •Tolerance of shank diameter is h3 (0~0.0025)

[SSE400] [CBN Square End Mill] •Possible to machine the corner edge of hardened steels. •Intensified wear resistance by NS original design of cutting edge.

[SSE600] [CBN Square End Mill] •Possible to machine the corner edge of hardened steels. •Intensified wear resistance by NS original design of cutting edge.

[SSF120] [“CBN Super Surface” End Mill] • Appropriate for datum plane machining on presicion machining. • NS original design and corner R to realize stable machining surface. • We recommend using oil mist coolant.