Products | NS TOOL CO.,LTD.

MSRS230

[MUGEN-COATING 2-Flute Radius End Mill]

• It is possible to cut both straight and corner radius simultaneously.
• It is very suitable for high speed cutting because the length of cut is short.

[mm/¥]

Code No.	(D)Dia.	(R)Corner Radius	(l)Length of Cut	(γ)Neck Taper Angle	(d)Shank Dia.	(L)Overall Length	Retail Price
08-00700-01001	1	R0.1	2	9°	4	60	7,000
08-00700-01002		R0.2					7,000
08-00700-01003		R0.3					7,000
08-00700-01501	1.5	R0.1	3	9°	4	60	7,000
08-00700-01502		R0.2					7,000
08-00700-01503		R0.3					7,000
08-00700-01505		R0.5					7,000
08-00700-02001	2	R0.1	4	9°	4	60	7,000
08-00700-02002		R0.2					7,000
08-00700-02003		R0.3					7,000
08-00700-02005		R0.5					7,000
08-00700-02501	2.5	R0.1	5	9°	4	60	7,000
08-00700-02502		R0.2					7,000
08-00700-02503		R0.3					7,700
08-00700-02505		R0.5					7,700
08-00700-03001	3	R0.1	6	9°	6	60	8,600
08-00700-03002		R0.2					8,600
08-00700-03003		R0.3					8,600
08-00700-03005		R0.5					8,600
08-00700-03010		R1					9,400
08-00700-04001	4	R0.1	8	9°	6	65	8,700
08-00700-04002		R0.2					8,700
08-00700-04003		R0.3					8,700
08-00700-04005		R0.5					8,700
08-00700-04010		R1					9,500
08-00700-05001	5	R0.1	10	9°	6	70	8,800
08-00700-05002		R0.2					8,800
08-00700-05003		R0.3					8,800
08-00700-05005		R0.5					8,800
08-00700-05010		R1					9,600
08-00700-05015		R1.5					10,000

When you order, indicate MSRS230(D)x(R).